A515 Gr.60|SA515 Gr.60|A515 Gr.60N pressure vessel steel plate--YUSHENG STEEL

A515 Gr.60|SA515 Gr.60|A515 Gr.60N

Source：YUSHENG STEEL

A515 Gr.60 pressure vessel steel plate is used to make steam boiler, pressure vessel and other pressure vessel structural parts. This kind of steel plate is strictly required because it bears certain air pressure and water pressure, as well as the use environment of different temperatures, such as medium and low temperature.

A515 Gr 60 Steel plates less than or equal to 2 in (50 mm) in thickness are usually delivered in hot rolled. Normalizing treatment can be ordered, but those greater than 2 in (50 mm) in thickness must be delivered in normalizing state.

Chemical composition of Heat analysis for A515 Gr 60 steel plate (Max %):

Thickness	C	Si	Mn	P
T≤1in(25mm)	≤0.24	0.15-0.45	≤0.98	0.035
25mm＜T≤50mm	≤0.27
50mm＜T≤100mm	≤0.29
100mm＜T≤200mm	≤0.31
T＞8in(200mm)	≤0.31

Mechanical properties for A515 Gr.60 steel plate:

Tensile strength,ksi(Mpa)

Yield strength,ksi(Mpa)

Elongation ≥,% 200mm

Elongation ≥,% 50mm

A515 Gr.60

(415)

60-80

(415-550)

≥32(220)

Other additional heat treatment for A515 Gr.60:TMCP,Normalizing,Quenched,Tempered,and Q+T.

Additional technical requirement:UT,Impact test,Z15-Z35,HIC.

Related Grade:A515 Gr.65,A515 Gr70